The Discovery Series Selectorized Line Shoulder Press delivers targeted movement with a movement arm that is counter-balanced with a rear-set pivot designed to create a proper motion path and low starting lift weight. The ratcheting gas-assisted seat adjusts to fit a wide range of users.
|Weight Stack||Units have fully shrouded weight stacks in full compliance with ASTM and EN standards.
Each selector plate is entirely precision-machined on all surfaces. Top plate has replaceable precision self-lubricating bushings.
The plates feature a black painted protective finish. Guide rods are precision centerless ground, polished, with corrosion-resistant plating for smooth operation and rust retardation.
The weight stack is elevated to facilitate user pin selection from seated position.
|Upholstery||Premium-quality 3D urethane molded-foam padding for maximum comfort. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Automotive-grade, two-textured fabric features double top stitching on all seams.|
|Adjustable Seat||Yes, gas-assisted ratcheting seat adjustment|
|Adjustments||Ratcheting seat adjustments require only a lift to release the lever. Handles include slip-resistant rubber sleeves with machined alloy end-caps. Adjustment points are highlighted with a contrasting color for ease-of-use.|
|Instructional Placard||Easy to understand exercise placards feature large set-up and start and finish position diagrams that are visibly easy to identify. QR codes provide quick and easy video instruction from your smart phone or Preva app.|
|Bearings and Pivot Points||Oversized, linear, re-circulating ball bearings run on case-hardened shafts and are sealed and self aligning. Pivot points and joints feature motor-grade sealed ball bearings, or sleeve bearings, utilizing either oil-impregnated bronze bushings or pre-lubricated nylon bushings. Bolts are grade 5 or above in all applications.|
|Water Bottle and Accessories Holder||The drink-and-accessory holder features large open, even surfaced area, easily accessible and easy to keep clean.|
|Pulleys and Cables||Glass-fiber-reinforced nylon pulleys for durability, with precision motor-grade ball bearing pulleys. Cable consists of 3/16 inch (7″x19″) aircraft cable coated with black pressure-extruded nylon to 1/4 inch or 1/8 inch and coated to 3/16 inch. The cables conform to specification MIL-W-83420D-BARE cable only. When used, redirection pulleys route cables close to frame to minimize chance of external interference.|
|Frame and Finish||The frame is 11 gauge (.120 in) 2×4″ electroweld steel racetrack tubing. Movement arms are made of electroweld steel round tubing. The five-stage material prep/wash process if followed by an electrostatically applied, heat-cured powder coat.|
|Bolt Down Capability||Yes|
|General Features||Movement designed to create optimal motion path. Ratcheting gas-assisted seat adjusts to fit wide range of users.|
|Incremental Add-on Weight||5 lb (2.3 kg)|
|Standard Shroud Color||Pacific Blue
|Weight Stack||200 lbs / 91 kg|
|Standard Upholstery Colors||All Spice
|Standard Frame Colors||Gloss Metallic Silver
Black Magic Gloss
|Workout Area (L x W)||67 L x 52 W inches / 170 L x 132 W cm|
Equipment Dimensions and Weight
|Length||67 inches / 170 cm|
|Width||52 inches / 132 cm|
|Equipment Weight||538 lbs / 244 kg|
|Height||59 inches / 150 cm|
Shipping Dimensions and Weight
|Shipping Weight||580 lbs / 265 kg|